Fiber Optics 51 0057 SMA - Standard 905 - Stainless Steel w strain relief
| Quantity: | 50+ | 100+ | 250+ | 500+ | 1000+ | 5000+ |
| Price: | $4.70 | $3.90 | $3.60 | $3.35 | $2.93 | $2.76 |
Manufacture:
RoHS Certification: Yes
Applications: Any indoor industrial or data communications networking including SERCOS.
Standard SMA connector for use with the industrial standard 1.0 mm core plastic optical fiber. Ferrule body features retention ridges for holding push-on strain reliefs. These ridges also slide underneath the outside jacket on dual-jacket fiber construction such as GHTT4001 holding the outer jacket securely to the connector.
(This connector is better connector for field installations because of possible damage to polymer fiber core during the collapsing of heat shrink.)
Can be used as replacement for SMA connectors where a RoHS compliant stainless steel connector is desired.
Includes connector, yellow strain relief and dust cap. (Electo-polish finish upon request.)
| Structure | ||||||
| Ferrule Material | Stainless | |||||
| Connector Body Material | Stainless | |||||
| Crimp | .1 inch hex | |||||
| Epoxy | Optional | |||||
| Termination/Polishing | Polish | |||||
| Number of Fibers | 1 | |||||
| Unit | Value | |||||
| Optical Fiber Size | mm | 1 | ||||
| Jacket Diameter | mm | 2.2 | ||||
| Approximate Weight | g | |||||
| Performance | Criteria for Acceptance and/or [ Test Conditions ] |
Unit | Value | |||||
| Maximum Rating |
Storage Temperature | No Physical Deterioration [ in a Dry Atmosphere ] |
° C | -55 ~ 125 | ||||
| Operation Temperature | No Deterioration in Optical Properties [ in a Dry Atmosphere ] |
° C | -55 ~ 125 | |||||
| Optical Properties |
Typical Loss | (650 nm Light) [ 25°C 50% RH ] |
dB | 1.8 | ||||
| Maximum Loss | (650 nm Collimated Light) [ 25°C 50% RH ] |
dB | ||||||
Search
Cart Contents