Manufacture:
RoHS Certification: Yes
Applications: Suitable for any indoor industrial or data communications networking including SERCOS.
Standard SMA connector for use with the industrial standard 1.0 mm core and 2.2 OD jacket. Ferrule body is straight wall for use with the standard single jacket fiber, or for sliding underneath the outside jacket on dual-jacket fiber construction.
Can be used in replacement for other SMA connectors where an all stainless steel RoHS connector is desired.
| Structure | ||||||
| Ferrule Material | Polymer | |||||
| Connector Body Material | Polymer | |||||
| Crimp | Custom | |||||
| Epoxy | No | |||||
| Termination/Polishing | Cleave | |||||
| Number of Fibers | 1 | |||||
| Unit | Value | |||||
| Optical Fiber Size | mm | .230 | ||||
| Jacket Diameter | mm | 2.2 | ||||
| Approximate Weight | g | 1 | ||||
| Performance | Criteria for Acceptance and/or [ Test Conditions ] |
Unit | Value | |||||
| Maximum Rating |
Storage Temperature | No Physical Deterioration [ in a Dry Atmosphere ] |
° C | -40 ~ 80 | ||||
| Operation Temperature | No Deterioration in Optical Properties [ in a Dry Atmosphere ] |
° C | -40 ~ 80 | |||||
| Optical Properties |
Typical Loss | (650 nm Light) [ 25°C 50% RH ] |
dB | 1.5 | ||||
| Maximum Loss | (650 nm Collimated Light) [ 25°C 50% RH ] |
dB | 2 | |||||
| Mechanical Characteristics |
Retention Strength | N | 45 | |||||