Manufacture: AMP/Tyco
RoHS Certification: No
Applications: Indoor point-to-point communications, sensor and security applications where a non-polish connection is desired
AMP dry, non-polish (DNP) optical fiber terminations and device mounts are a proven line of products very popular for use with 1000 µm jacketed simplex and duplex plastic fiber.
| Structure | ||||||
| Ferrule Material | Polymer | |||||
| Connector Body Material | Polymer | |||||
| Crimp | No - Internal retention clip | |||||
| Epoxy | No | |||||
| Termination/Polishing | Hot knife with fixture, or polishing | |||||
| Number of Fibers | 1 | |||||
| Unit | Value | |||||
| Optical Fiber Size | mm | 1 | ||||
| Jacket Diameter | mm | 2.2 | ||||
| Approximate Weight | g | |||||
| Performance | Criteria for Acceptance and/or [ Test Conditions ] |
Unit | Value | |||||
| Maximum Rating |
Storage Temperature | No Physical Deterioration [ in a Dry Atmosphere ] |
° C | -40 ~ 60 | ||||
| Operation Temperature | No Deterioration in Optical Properties [ in a Dry Atmosphere ] |
° C | -40 ~ 60 | |||||
| Optical Properties |
Typical Loss | (650 nm Light) [ 25°C 50% RH ] |
dB | 2 | ||||
| Maximum Loss | (650 nm Collimated Light) [ 25°C 50% RH ] |
dB | ||||||